|
DIAGNOSE THE CHARGING SYSTEM with the VOLTAGE LOGGER
Used to show the NITE batteries are charging correctly or if the NITE Plus system is drawing the correct amount of power.
Below we have included links to the data loggers used in the field by our technicians to gather battery voltage at periodic intervals thereby giving information on the alternator and NITE System performance as well.
These data loggers can show that the alternator is the correct size and that the separator is functioning properly.
Overall it will show a variety of information … truck batteries, separator switch, Nite batteries recharging to the full state, as well as the alternator charging correctly.
MONITOR INTERNAL SLEEPER TEMPERATURE with the TEMPERATUREAND HUMIDITY LOGGER
Used in conjunct with the voltage logger, the internal sleeper temperature logger can also indicate that the unit is being used properly: preconditioning is being done, temperature the sleeper maintains, etc.
Battery-powered remote 0–30 VDC voltage logger
http://www.mccdaq.com/usb-data-acquisition/USB-503.aspx
Key Highlights
- USB interface for set-up and data download
- Red and green LED status indication
- Logging rate intervals between 10 sec and 12 hr
- Connection via two screw terminals
- User-programmable alarm thresholds
- Replaceable long-life lithium battery
- 0 to 30 VDC measurement range
- Stores up to 32,510 measurements
Battery-powered remote temperature and humidity logger
http://www.mccdaq.com/usb-data-acquisition/USB-502.aspx
Key Highlights
- Easy to use—no training required
- All software included to install, configure and download data
- Software includes powerful strip chart and export to Excel®
- Protected against moisture to IP67 standard when cap is installed
- Battery-operated
- 1-year warranty
- Supports 0 to 100% relative humidity
- Supports -35 to +80��C (��1��C accuracy)
- Stores 16,382 temperature readings and 16,382 relative humidity measurements
|
